Sex Doll Care, Cleaning & Maintenance FAQ

Use lukewarm water with a mild, fragrance-free soap or a cleaner specifically approved for the doll’s material. Avoid bleach, alcohol, strong disinfectants, solvents, abrasive cleaners and essential oils unless the manufacturer explicitly approves them. Test any uncertain product on a small hidden area first.

Pat the surface with a clean, soft, lint-free towel rather than rubbing it. Allow openings, folds and hard-to-reach areas to air-dry completely before storage. Do not use high-temperature hair dryers, heaters or direct sunlight, because excessive heat can damage the material, adhesive, makeup or electronics.

Do not fully immerse a sex doll unless the manufacturer explicitly confirms that the model is waterproof and safe to submerge. Water can enter the neck, joints, seams, openings or electronic components. Use controlled rinsing or a damp cloth and keep electrical parts and unsealed areas dry.

Not always. TPE is porous and often needs renewal powder after it is fully dry, while silicone is generally less porous and normally does not require the same powdering routine. Makeup, glued parts, hair and electronics may need additional precautions. Follow the instructions for the exact model.

Remove the source immediately and gently clean the area with a product approved for the material. Do not scrub or use bleach, alcohol or solvents. Some stains may fade gradually. For persistent stains, contact RealisticDoll or the manufacturer before using a stain remover, because TPE and silicone require different treatment.

Yes, if the manufacturer recommends it. After the clean doll is completely dry, apply a thin, even layer of approved renewal powder or pure cornstarch. This helps reduce tackiness and friction. Avoid talc, scented powders and excessive buildup.

Store the doll clean, completely dry and in a cool, ventilated place away from sunlight, heat, moisture, sharp objects and dye-transferring fabrics. Keep joints in a relaxed neutral position and avoid prolonged pressure on one area. Use the original packaging, a suitable storage case or a supported hanging system approved for the model.

Wash new clothing before use, choose light-colored colorfast fabrics and avoid dark denim, leather, lace or printed materials that may transfer dye. Test garments on a hidden area, use a light protective bodysuit when suitable and do not leave questionable clothing on the doll for long periods.

Remove the wig before washing or styling it. Detangle gently from the ends upward with a wide-tooth comb, follow the wig maker instructions and air-dry on a stand. Avoid high heat unless the fibers are heat-safe. A light-colored wig cap can reduce friction and dye transfer.

Handle the face gently and avoid rubbing painted areas. Use a soft damp cloth and only cleaners approved for the material, keeping water away from removable eyes, eyelashes and electronics. Do not use alcohol, makeup remover or household cosmetics unless the manufacturer confirms they are safe.

Move each joint slowly within its natural range and never force resistance. Support heavy limbs while posing, avoid using fingers as handles and do not bend wired fingers sharply or repeatedly. Return the doll to a relaxed pose after use and inspect for unusual looseness, noise or exposed wire.

Long-term sitting or unsupported standing is not recommended. Continuous pressure can flatten soft material, crease the skin and strain joints or feet. Store the doll in a relaxed position with weight evenly supported, and change its position regularly. Standing models still need stable support for extended display.

Clean the doll after use, rinse away residue and dry every surface and cavity completely before storage. Keep it in a cool, dry, ventilated place and never seal it while damp. Inspect removable inserts and hidden folds regularly. Persistent odor, discoloration or suspected mold should be assessed before further use.

Some small cuts, tears, loose eyelashes and minor cosmetic issues can be repaired, but the correct method depends on whether the doll is TPE or silicone. Stop using the doll, photograph the damage and contact RealisticDoll before applying glue, heat or chemicals. Incorrect products can permanently damage the surface.

Proper maintenance is essential for preserving the lifelike quality of your doll. Regarding the application of talcum powder, here is what you need to know:

• Application Quantity: You do not need to worry about over-applying powder. The goal is to achieve complete and even coverage across all skin surfaces. Simply pat the powder onto the body until the skin feels dry, smooth, and silky. Any excess powder can be easily brushed away with a soft cloth or a large makeup brush.
• Why Powdering is Mandatory: Talcum powder (or specialized doll maintenance powder) acts as a protective barrier. Because the materials used for high-quality dolls are naturally prone to becoming tacky over time, the powder ensures the skin remains soft to the touch.
• Risks of Skipping Maintenance: If you neglect to apply powder regularly:
  • Surface Stickiness: The skin will develop a tacky texture that feels unpleasant and unrealistic.
  • Debris Attraction: A sticky surface will act as a magnet for dust, lint, and hair, which can be difficult to remove and may lead to staining.
  • Loss of Elasticity: Over time, the lack of a dry surface barrier can affect the perceived suppleness and matte finish of the skin.

Recommendation: Always apply powder after cleaning and thoroughly drying your doll to ensure the material stays in peak condition for years to come.

Yes, wigs with dark-colored linings or intense pigments can cause staining if they come into direct contact with surfaces for extended periods.

How to Prevent Staining

• Use a Wig Cap: The most effective way to prevent staining is to wear a wig cap or hair net before putting on the wig. This acts as a protective barrier between the lining and the surface.
• Choose Lighter Linings: When possible, opt for wigs with beige or light-colored interior caps.

How to Treat Existing Stains

If you discover that your doll or surface has been stained, follow these steps:

1. Olive Oil Treatment: Apply a small amount of olive oil directly to the stained area.
2. Seal with Plastic Wrap: Cover the area tightly with plastic wrap. This helps the oil penetrate the surface and break down the pigment.
3. Repeat the Process: For stubborn stains, you may need to repeat this procedure multiple times. Clean the area gently between applications until the stain is fully removed.

High-quality doll materials are designed with inherent elasticity, meaning most instances of flattening or compression can be successfully reversed. To restore the anatomical shape of your doll's buttocks, please follow these professional maintenance steps:

• Horizontal Positioning: Lay the doll horizontally on a flat, stable surface to remove any direct pressure from the affected area.
• Elevation Technique: Place a soft cushion, rolled towel, or padded support directly underneath the buttocks to gently elevate and support the gluteal curves.
• Recovery Period: Allow the doll to rest in this position for several days. The material's structural memory will naturally work to return the area to its original, rounded form.

It is important to note that the premium manufacturers partnered with RealisticDoll utilize advanced anti-deformation technologies and high-density material formulations specifically engineered to resist long-term flattening during storage. If the indentation persists after several days or if you have additional maintenance questions, please contact our online customer service team for specialized assistance.

While modern manufacturing processes used by the premium brands represented by realisticdoll ensure that dolls are nearly odorless upon arrival, it is common for a new product to retain a slight "factory scent" due to being sealed in airtight packaging for transit. To eliminate this odor effectively, please consider the following steps:

• Natural Ventilation: The most effective method is to place your doll in a well-ventilated room. Fresh air circulation allows volatile compounds to dissipate naturally. Typically, any lingering scent will vanish within three to seven days.
• Surface Cleaning: You may gently wipe the doll's skin with a soft cloth dampened with lukewarm water and a mild, pH-neutral soap. Ensure the doll is dried thoroughly afterward.
• Renewal Powder: Applying a light layer of high-quality talcum or cornstarch-based renewal powder can help absorb odors and maintain the realistic, matte texture of the skin.

Rest assured that all manufacturers we partner with adhere to strict compliance and safety standards. Any initial scent is a normal, non-toxic byproduct of the production process and is not a sign of poor quality.

Proper storage is essential to preserving the realistic appearance and structural integrity of your doll. There are several professional methods to ensure your doll remains in pristine condition:

• Horizontal Bed Placement: You may lay your doll flat on a bed. To prevent the buttocks from flattening due to prolonged pressure, it is highly recommended to place soft cushions or specialized padding under the thighs and the small of the waist.
• Original Factory Packaging: Our dolls are shipped in high-quality, reinforced cardboard boxes. These containers are specifically designed for the doll's weight and dimensions, providing an excellent and sturdy long-term storage solution.
• Discrete Storage Containers: For those seeking privacy, locking suitcases or dedicated sofa storage chests are ideal. These provide a secure, dust-free environment while ensuring your doll is kept away from prying eyes.
• Wardrobe or Cabinet Storage: If space permits, a wardrobe is a suitable storage location. You can store the doll in either a sitting or lying position, provided you use ample soft padding to support the joints and prevent skin indentation.

Regardless of the method chosen, always ensure the storage area is cool, dry, and away from direct sunlight to protect the material's longevity.

To ensure the longevity and structural integrity of your doll, please follow these professional storage guidelines after every use and cleaning session:

• Restore Neutral Positioning: Once the doll is cleaned and completely dry, immediately return it to its "factory state." Avoid leaving the doll in extreme poses, such as wide splits or arms raised, for extended periods.
• Prevent Material Fatigue: Do not maintain bent limbs or a seated position for too long. Prolonged localized stress and stretching can lead to permanent material deformation or surface cracking.
• Standing and Foot Care:
  • Non-standing models: These must never be stood up, as the internal skeleton may pierce the feet.
  • Standing-enabled models (Hardened feet or TPE nailing): These are designed for short-term standing only. For any long-term upright display, the use of a dedicated support stand is mandatory.
• Optimal Environment: Keep the storage space cool and dry. It is highly recommended to use desiccants or bamboo charcoal bags to regulate humidity. Ensure the area is free from sharp objects and far from any heat sources or open flames.
• Secure Packaging: When packing or transporting the doll, always place the head sculpt inside its specialized protective mask. The body should be wrapped securely in the provided blanket to prevent bruising, bumps, or surface damage.

Proper maintenance is essential to preserving the quality and lifespan of your doll. Please follow these professional care guidelines:

• Cleaning Restrictions: Do not use alcohol, disinfectants, or other corrosive liquids on the doll's surface. These substances can degrade the material.
• Bathing Guidelines: When washing, ensure the water temperature remains below 40°C. You may use standard body wash, mild soap, or laundry detergent. Avoid vigorous rubbing or applying excessive pressure to the body during the cleaning process.
• Head and Joint Care: Use a damp towel to gently wipe the head area. It is crucial to keep the neck connector dry and avoid water ingress in this area to prevent internal rusting.
• Drying and Surface Finish: Allow the doll to air dry naturally in a well-ventilated space. Once dry, apply a uniform layer of talcum or baby powder. Regular application of powder is recommended to effectively manage skin oils and maintain a soft, smooth texture.
• Storage Environment: Store your doll in a cool, dry environment. For added protection, we suggest using the high-quality blanket provided with your purchase as a protective base underneath the doll's body.

Yes, maintaining your doll is straightforward if you follow a few essential steps to ensure its longevity and hygiene.

1. Daily Internal Cleaning: For routine maintenance of internal channels, place a waterproof mat under the doll's lower body and use the provided cleaning irrigation tool to rinse the area thoroughly.

2. Full Body Bathing: If a full bath is required, you may carry the doll to the bathroom or use a dedicated doll stand to move it. Please adhere to the following guidelines:

• Water Temperature: Keep the water temperature below 40°C (104°F) to protect the material.
• Cleaning Agents: You may use standard body wash, mild soap, or detergent.
• Handling: Avoid vigorous rubbing, scrubbing, or excessive squeezing of the body material.
• Head & Neck Care: Use a damp towel to wipe the head. Specifically, avoid getting water into the neck joint/connector to prevent internal rusting and structural damage.

3. Post-Cleaning Care & Storage:

• Drying: Allow the doll to air dry naturally in a well-ventilated area.
• Finishing: Once completely dry, apply talcum or baby powder evenly across the skin to maintain a soft, non-tacky texture.
• Environment: Store the doll in a cool, dry environment to prevent moisture buildup.